HZW 53.0610 Manual rack drive 6000 N without rack, We04
Product information "HZW 53.0610 Manual rack drive 6000 N without rack, We04"
The HZW 53.0610 safely transmits forces of up to 6000 in tension and compression. The smooth-running, self-locking worm gear unit made of hardened steel and bronze in a cast housing is designed for continuous operation at temperatures from –20 °C to +60 °C (static up to 90 °C). The hand force is 180 N at a stroke of 11 mm/n per crank revolution.
The available stroke is 0 mm. With this version (stroke > 1100 mm), the reduced compressive force must be taken into account.
By coupling several units via a 3/4" tube (DIN EN 10255), linear loads can also be moved: The HZW 53.0310 and HZW 53.0610 versions each drive a non-self-locking follower unit (HZW 53.0311 / HZW 53.0611) synchronously via laterally extending shafts. The maximum total load is 6000.
Operation with a motorized drive system is also possible in accordance with the assembly and operating instructions. Lateral forces on the drive system must be ruled out in all operating cases.
As options, a folding handle in a galvanized version and a rack run-out stop are available.
(HZW 53, Koppeln mit 3'/4"-Rohr)
| Design: | ZW with crank |
|---|---|
| Drive Type: | crank |
| Force F (N): | 6000 |
| Front drive shaft: | Square wrench size 12 |
| Manual crank force FH: | 180 N |
| Output Drive: | Diameter 20 mm / Hole 8.2 mm |
| Output shaft right: | Diameter 20 mm / Hole 8.2 mm |
| Rear drive shaft: | without |
| Stroke per crank revolution Hk: | 11 mm/n |
| Weight: | 4.2 |