EWA 52.2503 Power drive 250 Nm 3.8 rpm We06 120V 60Hz LSC40 AC
Product information "EWA 52.2503 Power drive 250 Nm 3.8 rpm We06 120V 60Hz LSC40 AC"
The Lock power drive EWA 52.2503 is an extremely quiet, self-locking double worm gear with a torque of 250 Nm and runs at 3,8 rpm.
- maintenance-free thanks to high-quality industrial oil
- no oil leaks thanks to high-quality seals and bearings
- universal mounting possible
- duty cycle S3-40%
- Ambient temperature from -5°C to +60°C
- Protection class IP55 against dust and water jets
- Power supply of 120V 1~ 60Hz and 6.9 A
- single-phase motors are factory pre-wired with connection cable and integrated winding protection contact
- connection cable with special sheathing for UL/CSA-compliant installation in outdoor areas (North America)
- Shaft end Diameter 26 mm / hole 10.2 mm for installation with limited space
Limit switch cut-off
The limit switch cut-off is achieved via thecontrol unit supply voltage 110-240 V AC including an additional limit switch. The end positions are set with two clicks, saving time during installation. Particularly advantageous: the additional limit switch retains the end position even after a power failure. This prevents the end positions from being overrun and the resulting damage to the application. Choose the appropriate position repeater LPR 02 for analogue signal 0–10 V or 4–20 mA, or LPR 04 for additional digital signal (incremental).
The power drives EWA 52 are installation-compatible with EWA 14.
(EWA 52, We06, LSC 1~, 60 Hz)| Current strength I: | 6.9 A |
|---|---|
| Limit switch: | control unit supply voltage 110-240 V AC |
| Operating voltage U (V): | 120V 1~ 60Hz |
| Options: | Standard |
| Performance P: | 0.8 kW |
| Revolutions per minute n: | 3,8 |
| Shaft type: | Diameter 26 mm / hole 10.2 mm |
| Torque T: | 250 Nm |
| Weight: | 28.6 |
| n ~ (1/min): | 3 |